Industry Information

Access to timely dynamic information

Can a biaxial motor rotate with one axis?

Can a biaxial motor rotate with one axis?

Feasible, but also a very common application mode

What is the shaft of the motor?

What is the shaft of the motor?

The rotating shaft of the motor is the core part of the rotor part, which carries and supports the rotor core, and cooperates with the bearing and the end cover to control the axial position size of the rotor.

What is the difference between the shaft spindle drive shaft

What is the difference between the shaft spindle drive shaft

The difference between the shaft spindle and the drive shaft is that the working principle is different. The spindle is used to support the rotating parts and only bear the bending moment without transmitting torque; the transmission shaft is a rotating body with high speed and less support; the rotating shaft is a must used to connect the main parts of the product and is used to withstand both bending moments during rotation. The shaft that bears torque.

Ningbo Zhongzhou Rio Tinto Ultrafine Materials Co., Ltd.

Ningbo Zhongzhou Rio Tinto Ultrafine Materials Co., Ltd.

Displace the groove pulley on the motor and run out of the serial shaft. After removing the motor, use two crowbars to symmetrically pry the motor wheel. If it is cast iron, pry the groove pulley next to the output shaft of the motor. Otherwise, the pulley will be broken. Use a puller as much as possible.

The reels you don't understand

The reels you don't understand

The shaft is an important part and plays a key role in the whole. The shaft and accessories have an important position in the whole set of product materials. It will directly affect the comprehensive quality of the product and have a great impact on the normal use and service life of the product. The key to the service life of the shaft lies in the maintenance of the moving parts. Can be used to wipe the brightening agent, can add light, hinges, hanging wheels, casters and other moving parts in the long-term movement may be due to the adhesion of dust and reduce performance, every six months or so point one or two drops of lubricating oil can keep its smooth.

What is the harm if the shaft is worn out

What is the harm if the shaft is worn out

The main parts between products must be applied to the rotating shaft. The shaft that bears both bending moment and torque during rotation is called the rotating shaft. And if it is worn, what kind of harm will it bring?

< 1 > proceed page